1.50 or 1.75, Which Is Higher? The College Grading Scale in the Philippines

Teacher Guide October 26, 2026 · 7 min read
1.50 or 1.75: the college grading scale in the Philippines

First-year students ask it every semester, and so do parents who went to school under percentages: “Which is higher, 1.50 or 1.75?” The question makes sense, because the Philippine college grading scale runs backwards. On the 1.00 to 5.00 scale used by many colleges and universities, the smaller number is the better grade.

This guide explains how to read the scale, what each grade usually means in percent, what 3.00, 4.00, 5.00, and INC mean, what it takes to make the dean’s list at two universities whose rules we checked, and how instructors can set the scale up in a class record. It is written for college instructors who have to explain grades, and for students who want to understand their own.

The 10-second answer: 1.50 is the higher grade. On the 1.00–5.00 scale, 1.00 is the best, 3.00 is the lowest passing grade, and 5.00 is failing. In a common mapping, 1.50 is about 91–93% and 1.75 about 88–90%. Each school sets its own percentage cut-offs and honors rules, so the registrar’s table on the back of the transcript or in the student handbook is the one that counts.


How the college grading scale works

The scale has a small number of fixed steps. Most schools use quarter steps between 1.00 and 3.00, then jump to 5.00 for a failing grade. Some add a 4.00 for a conditional grade.

  • Lower is better. 1.00 is the highest grade a student can receive; 3.00 is the lowest that still passes.
  • The steps are fixed. A final grade is one of the listed values (1.00, 1.25, 1.50 and so on), not any decimal. A course grade of “1.6” does not exist on a quarter-step scale; the instructor’s percentage is mapped to the nearest step below or above according to the school’s table.
  • Averages are decimals. The General Weighted Average (GWA) across courses can be any number, such as 1.7656, because it averages many grades by units. Our guide on how to compute GWA shows the arithmetic.

Which is higher, 1.50 or 1.75?

1.50 is higher. It sits one step above 1.75 on the scale. In percentage terms, a 1.50 usually means about 91 to 93 percent, and a 1.75 about 88 to 90 percent. The same logic answers the related questions:

  • 1.25 or 1.50? 1.25 is higher.
  • 2.00 or 2.25? 2.00 is higher.
  • 1.00 or 1.25? 1.00 is the highest grade on the scale.
  • 2.75 or 3.00? 2.75 is higher; 3.00 is the lowest passing grade.

When students compare GWAs, the same rule holds: a GWA of 1.62 is better than 1.70.

Explaining it to students and parents

Parents who studied under percentages, and freshmen fresh from DepEd report cards where 90 beats 88, read the scale the wrong way round at first. One comparison usually settles it: think of the grade as a ranking position, where first place (1.00) is better than second. Then show them the school’s table with the percentage beside each step, so that “1.75” becomes “about 88 to 90 percent”, a number they already understand. Do this in the first week of the semester, not on the day grades come out.

The 1.00–5.00 scale in percent

There is no single national table. Every college publishes its own, and two schools can disagree by a point or two at each step. The table below is one common mapping, the same one Skoolari uses for its built-in “University (1.00–5.00)” preset. Use it to understand the shape of the scale, not to convert an official grade.

GradePercentage (common mapping)Typical meaning
1.0097–100Excellent
1.2594–96Excellent / Superior
1.5091–93Very good
1.7588–90Very good / Good
2.0085–87Good
2.2582–84Good / Fair
2.5079–81Satisfactory
2.7576–78Satisfactory
3.0075Passing
5.00Below 75Failed

Some schools start 1.00 at 96 or 98 percent, some pass at 70 or 60 percent instead of 75, and some publish adjectival ratings only. If you need to convert a grade for a scholarship or transfer, use the issuing school’s own table; our guide to converting grades between school scales explains why.

How the percentage is computed in the first place

The percentage comes from the instructor’s syllabus: weighted components such as quizzes, projects, and major exams, then term grades (prelim, midterm, finals) combined into a final percentage. Only the last step maps the result to the 1.00–5.00 scale. Our guide to computing final grades in college walks through all three layers.

What 3.00, 4.00, 5.00, INC, and DRP mean

The marks below the passing line are where most questions come from, and they are also where schools differ most.

MarkUsual meaning
3.00Passed. The lowest passing grade.
4.00Conditional, at schools that use it. At UP Diliman, for example, the registrar’s rules give the student a removal examination; passing it gives 3.00, failing it gives 5.00, and a 4.00 that is never removed becomes 5.00.
5.00Failed. The course must be retaken to earn credit.
INCIncomplete. Requirements are missing, usually with a passing class standing; the student must complete them within the school’s deadline or the grade turns into a failing mark.
DRP / WDropped or withdrawn, according to the school’s rules on official dropping.

Deadlines for completing an INC and the rules for removal exams are set by each school. Instructors should know them before finals week, because students will ask.

What GWA do you need for the dean’s list?

Dean’s list rules are set by each university, often by each college, and they nearly always include more than a GWA. We checked the published rules of two universities:

UniversityRecognitionGWAOther conditions
UP DilimanCollege Scholar (Dean’s List of Scholars)1.75 or better (undergraduate)At least 15 units in the semester (or the normal load); no grade below 3.00; INC completed by the end of the semester
UP DilimanUniversity Scholar (President’s List)1.45 or better (undergraduate)Same unit and grade conditions
Bukidnon State UniversityDean’s List1.75 or betterNo grade lower than 2.00; at least 18 units; no dropping after registration or excess absences; exemplary conduct

Two lessons from this table hold almost everywhere:

  • “1.75 or better” includes 1.75 and every smaller number, so a GWA of exactly 1.75 qualifies where the rule is written that way, and 1.76 does not.
  • A single grade can disqualify. Many schools add a floor, such as “no grade below 2.00” or “no grade below 3.00”, and a minimum unit load. A student with a 1.70 GWA and one 2.50 may miss the list at one school and make it at another.

Latin honors at graduation (cum laude, magna cum laude, summa cum laude) follow the same pattern with stricter cut-offs. We cover them in the GWA guide.

Tips for instructors using the 1.00–5.00 scale

Most grade complaints in college are about the mapping, not about the scores. Four habits prevent them.

  1. Print the school’s mapping in your syllabus, with the percentage range for every step and the passing percentage.
  2. Decide rounding before the semester starts. For example: the final percentage is rounded to a whole number, then mapped. Apply it to everyone.
  3. Keep raw scores. When a student contests a 1.75, the earned and possible points per component settle it in a minute.
  4. Watch the boundaries. Look again at every student within half a point of a step, especially at 3.00 and at the step a dean’s list floor depends on.

Setting up the scale in Skoolari

In Skoolari’s College/SUC mode, each course has its own Grading System: the terms, the components and their weights, and the grade scale. Choose the University (1.00–5.00) preset and every percentage is shown with its grade (1.00 from 97%, 1.25 from 94%, down to 3.00 at 75% and 5.00 below). If your school’s table is different, edit the percentage for each step, or the passing grade, and the grade labels update everywhere in that course automatically. See the plans.

Related in this batch: how to compute GWA with units, and for basic-education colleagues, how DepEd handles 89.5 and honors.

Frequently asked questions

These are the questions students and new instructors ask most often about the college grading scale.

Which is higher, 1.50 or 1.75?

1.50. On the 1.00–5.00 scale the smaller number is the better grade.

Is 3.00 a passing grade in college?

Yes. At schools that use this scale, 3.00 is the lowest passing grade, usually 75 percent.

Is 2.00 a good grade?

Yes. It usually corresponds to about 85 to 87 percent and is described as “good” in most schools’ tables.

Is 1.75 a dean’s lister?

At schools where the rule reads “1.75 or better”, such as UP Diliman’s College Scholar and Bukidnon State University’s Dean’s List, a GWA of exactly 1.75 qualifies if the other conditions (unit load, no grade below the school’s floor) are met. Check your own school’s handbook.

Is 4.00 failing?

At schools that use it, 4.00 is a conditional grade: the student may take a removal examination. If it is not removed, it usually becomes 5.00.

What percentage is 1.25?

In a common mapping, 94 to 96 percent. Your school’s table may differ by a point.

Dean’s list and grading rules change; the university rules above were read from their registrar pages in October 2026. Always follow your own school’s current handbook.

The skoolari Team
Skoolari is an AI-powered class record & assessment system for Filipino teachers — MATATAG-ready records, AI test generation, and photo auto-checking. Try it free →

Ready to save hours every week?

Join teachers who are generating better assessments, grading faster, and keeping cleaner records — all in one place.

No setup required. Works in any modern browser.